Genie Z-25J Manual de usuario descargar pdf (Pagina 35)

Operator's ManualFourth Edition · First Printing

Part No. 114339 Z-45/25 • Z-45/25J 33

Inspections

Test Limited Drive Speed - Standard Base

Models

36 Press down the foot switch.

37 Raise the primary boom approximately

2 feet / 61 cm.

38 Slowly move the drive control handle to the full

drive position.

Result: The maximum achievable drive speed

with the primary boom raised should not exceed

1 foot / 30 cm per second.

39 Lower the primary boom to the stowed position.

40 Raise the secondary boom approximately

2 feet / 61 cm.

41 Slowly move the drive control handle to the full

drive position.

Result: The maximum achievable drive speed

with the secondary boom raised should not

exceed 1 foot / 30 cm per second.

42 Lower the secondary boom to the stowed

position.

43 Extend the primary boom approximately

1 foot / 30 cm.

44 Slowly move the drive control handle to the full

drive position.

Result: The maximum achievable drive speed

with the primary boom extended should not

exceed 1 foot / 30 cm per second.

45 Retract the boom to the stowed position.

If the drive speed with the primary boom raised, the

secondary boom raised or the primary boom

extended exceeds 1 foot / 30 cm per second,

immediately tag and remove the machine from

service.

Test Limited Drive Speed - Narrow Base Models

36 Press down the foot switch.

37 Raise the primary boom approximately

2 feet / 61 cm.

38 Slowly move the drive control handle to the full

drive position.

Result: The maximum achievable drive speed

with the primary boom raised should not exceed

6 in / 15 cm per second.

39 Lower the primary boom to the stowed position.

40 Raise the secondary boom approximately

2 feet / 61 cm.

41 Slowly move the drive control handle to the full

drive position.

Result: The maximum achievable drive speed

with the secondary boom raised should not

exceed 6 in / 15 cm per second.

42 Lower the secondary boom to the stowed

position.

43 Extend the primary boom approximately

1 foot / 30 cm.

44 Slowly move the drive control handle to the full

drive position.

Result: The maximum achievable drive speed

with the primary boom extended should not

exceed 6 in / 15 cm per second.

45 Retract the boom to the stowed position.

If the drive speed with the primary boom raised, the

secondary boom raised or the primary boom

extended exceeds 6 in / 15 cm per second,

immediately tag and remove the machine from

service.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 58 59

Comentarios a estos manuales

Sin comentarios

Genie Z-25J Manual de usuario Pagina 35

Comentarios a estos manuales